top of page

Application Process

Step 1

Surfaces must be dry, clean and free of residues.

Step 2

Apply acetone to remove old layers of sealer.

Step 3

Apply the Waterborne Dense Stone Sealer using a paper towel. One coat application only.

Avoid contact with surrounding areas. 

Step 4

Remove all excess with clean dry cloths after a dwell time of 45 minutes to 1 hour.

Step 5

Avoid moisture contact with the surface for a minimum of 12 hours after application. 

waterborne_dense_stone_sealer_

Cautions

WARNING: Causes serious eye irritation. Causes skin irritation. May cause respiratory irritation. Suspected of damaging fertility or the unborn child. Harmful to aquatic life. PRECAUTIONS: Do not handle until all safety precautions have been read and understood. Avoid breathing mist/vapors/spray. Wear protective gloves/protective clothing/ eye protection/face protection. Wash thoroughly after handling. Use only outdoors or in a well-ventilated area. KEEP OUT OF REACH OF CHILDREN.

First Aid

Immediately call a POISON CENTER/doctor if you feel unwell. IF INHALED: Remove the person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present, and easy to do. Continue rinsing. IF ON SKIN: Take off immediately all contaminated clothing. Rinse skin with water/shower. IF SWALLOWED: Call a poison center/physician if you feel unwell. In case of fire: Use alcohol-resistant foam or normal protein foam for extinction. CONTENTS: cyclomethicones (CAS #541- 02-6 and CAS #556-67-2), polydimethylsiloxane (CAS # 68554-54- 1), alkyl silane (CAS #2943-75-1), and ethoxylated alcohol (CAS # 68439-50-9).

Storage

Store locked up in a well-ventilated place. Keep cool.

Disposal

Dispose of contents/container to authorized hazardous or special waste collection point in accordance with any local regulation.

Website: drytreat.com

bottom of page